16 March 2021 | Can wearable technology be used to approximate cardiopulmonary exercise testing metrics?
| Jones, L; Tan, L; Carey-Jones, S; et al. |
19 April 2024 | Correlation between interfacial bond strength and degree of healing in overprinting PAEK on CF/PAEK composites
| Yi, N; Chen, Y; Shen, J; et al. |
19 August 2017 | Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites
| Berretta, S; Davies, R; Wang, Y; et al. |
14 December 2020 | In-situ synthesis of Metal Organic Frameworks (MOFs)-PA12 powders and their laser sintering into hierarchical porous lattice structures
| Chen, B; Davies, R; Chang, H; et al. |
5 June 2020 | Laser sintering of graphene nanoplatelets encapsulated polyamide powders
| Chen, B; Davies, R; Liu, Y; et al. |
7 September 2022 | Material extrusion thermal model mapped across polyetheretherketone isothermal and continuous cooling transformation charts
| Comelli, CA; Yi, N; Davies, R; et al. |
7 January 2021 | Mechanical property variance amongst vertical fused filament fabricated specimens via four different printing methods
| Davies, R; Yi, N; McCutchion, P; et al. |
8 May 2024 | Mobile amorphous fraction in polyaryletherketones and its influence on interlayer bonding in material extrusion
| Yi, N; Davies, R; McBean, M; et al. |
22 March 2022 | Multiscale Porous Poly (Ether-Ether-Ketone) Structures Manufactured by Powder Bed Fusion Process
| Liu, Y; Davies, R; Yi, N; et al. |
22 August 2022 | Multivariate correlation of PolyArylEtherKetone powder properties for additive manufacturing and a method for predicting spreading in polymer powder bed fusion
| Davies, R; Evans, K; Ghita, O |
13 August 2018 | A new method to prepare composite powders customized for high temperature laser sintering
| Yazdani, B; Chen, B; Benedetti, L; et al. |
29 April 2022 | Novel backbone modified polyetheretherketone (PEEK) grades for powder bed fusion with enhanced elongation at break
| Yi, N; Davies, R; Chaplin, A; et al. |
23 November 2023 | Observation of Peek Melting Peaks within the Additive Manufacturing Material Extrusion Process in Relation to Isothermal and Non‐Isothermal Processes
| Comelli, CA; Yi, N; Davies, R; et al. |
3 January 2022 | PEEK filament characteristics before and after extrusion within fused filament fabrication process
| Comelli, CA; Davies, R; van der Pol, H; et al. |
1 April 2022 | Powder Bed Fusion Versus Material Extrusion: A Comparative Case Study on Polyether-Ether-Ketone Cranial Implants
| Liu, Y; Yi, N; Davies, R; et al. |
24 September 2015 | Powder characteristics, microstructure and properties of graphite platelet reinforced Poly Ether Ether Ketone composites in High Temperature Laser Sintering (HT-LS)
| Wang, Yuan; Rouholamin, D; Davies, R; et al. |
23 March 2017 | Protection in government procurement auctions
| Cole, M; Davies, R; Kaplan, TR |
4 May 2023 | Prototype design for grading structures in powder bed fusion processes
| Mann, M; Davies, R; Lawrence, C; et al. |
25 August 2020 | A route to improving elongation of high-temperature laser sintered PEKK
| Benedetti, L; Evans, K; Davies, R; et al. |
8 January 2021 | Slow and fast crystallising poly aryl ether ketones (PAEKs) in 3D printing: crystallisation kinetics, morphology, and mechanical properties
| Yi, N; Davies, R; Chaplin, A; et al. |