dc.contributor.author | Glover, E | |
dc.date.accessioned | 2022-03-21T10:32:43Z | |
dc.date.issued | 2022-03-21 | |
dc.date.updated | 2022-03-21T09:40:14Z | |
dc.description.abstract | In this thesis, two Electronic Article Surveillance (EAS) systems will be studied, focusing
on the security tag element. Using metamaterial concepts, an acousto-magnetic tag that
resonates at 58 kHz with a smaller footprint will be presented. This will be achieved by
patterning the resonant magnetostrictive ribbons within the tag with air holes, as a finite
analogue to a Phononic Crystal (PnC), and measuring the relationship between the air hole
geometry and the resonance frequency, amplitude, and the number of resonant modes that
are excited. This will be achieved with experimental and computational studies, where
Finite Element Method (FEM) models will be used to investigate more geometries than can
be experimentally realised.
The effect of the air holes on the magnetic properties of the magnetostrictive ribbons will
then be understood through imaging the domain structure of the ribbons. It will be shown
that patterning the ribbons disrupts the domain structure, and there is a correlation between
the disrupted domain structure and the reduced resonance amplitude that is observed with
the patterned ribbons. Magnetic field annealing will then be used to attempt to recover the
resonance amplitude of the patterned ribbons.
The second security tag that will be studied is the 8.2 MHz Radio Frequency (RF) tag,
which does not currently operate on conductive materials. The conventional 8.2 MHz security
tag comprises of an LC circuit that is excited to resonance by the component of the magnetic
field perpendicular to the plane of the tag. By changing the component of the magnetic field
that excites resonance in the tag, so that the tag is excited by the component of the magnetic
field parallel to the plane of the tag, two new tags are presented that are based off resonant
LC circuits with a ferrite at the core. It will be shown that both of the geometries presented
in this thesis are comparable to the conventional 8.2 MHz tag in resonance frequency and
amplitude. | en_GB |
dc.description.sponsorship | Engineering and Physical Sciences Research Council (EPSRC) | en_GB |
dc.identifier.uri | http://hdl.handle.net/10871/129102 | |
dc.identifier | ORCID: 0000-0002-1156-5977 (Glover, Emily) | |
dc.publisher | University of Exeter | en_GB |
dc.title | Magnetic metamaterials for innovative solutions to the inductive tagging problem | en_GB |
dc.type | Thesis or dissertation | en_GB |
dc.date.available | 2022-03-21T10:32:43Z | |
dc.contributor.advisor | Hicken, Robert | |
dc.contributor.advisor | Hibbins, Alastair | |
dc.publisher.department | Physical Sciences | |
dc.rights.uri | http://www.rioxx.net/licenses/all-rights-reserved | en_GB |
dc.type.degreetitle | PhD in Physics/Engineering | |
dc.type.qualificationlevel | Doctoral | |
dc.type.qualificationname | Doctoral Thesis | |
rioxxterms.version | NA | en_GB |
rioxxterms.licenseref.startdate | 2022-03-21 | |
rioxxterms.type | Thesis | en_GB |
refterms.dateFOA | 2022-03-21T10:32:58Z | |