dc.contributor.author | Alwi, Halim | |
dc.contributor.author | Edwards, Christopher | |
dc.date.accessioned | 2015-03-24T12:00:16Z | |
dc.date.issued | 2014 | |
dc.description.abstract | This paper presents the evaluation process and results associated with two different fault detection and diagnosis (FDD) schemes applied to two different aircraft actuator fault benchmark problems. Although the schemes are different and bespoke for the problem being addressed, both are based on the concept of a second order sliding mode. Furthermore both designs are considered as ‘local’ in the sense that a localized actuator model is used together with local sensor measurements. The schemes do not involve the global aircraft equations of motion, and therefore have low order. The first FDD scheme is associated with the detection of oscillatory failure cases (OFC), while the second scheme is aimed at the detection of actuator jams/runaways. For the OFC benchmark problem, the idea is to estimate the OFC using a mathematical model of the actuator in which the rod speed is estimated using an adaptive second order exact differentiator. For the jam/runaway actuator benchmark problem, a more classical sliding mode observer based FDD scheme is considered in which the fault reconstruction is obtained from the equivalent output error injection signals associated with a second order sliding mode structure. The results presented in this paper summarize the design process from tuning, testing and finally industrial evaluation as part of the ADDSAFE project. | en_GB |
dc.description.sponsorship | EU (FP7-233815) | en_GB |
dc.identifier.citation | Vol. 31, pp. 74 - 91 | en_GB |
dc.identifier.doi | 10.1016/j.conengprac.2013.09.014 | |
dc.identifier.grantnumber | ADDSAFE (Advanced Fault Diagnosis for Sustainable Flight Guidance and Control) | en_GB |
dc.identifier.uri | http://hdl.handle.net/10871/16593 | |
dc.language.iso | en | en_GB |
dc.publisher | Elsevier | en_GB |
dc.relation.url | http://dx.doi.org/10.1016/j.conengprac.2013.09.014 | en_GB |
dc.subject | Sliding mode | en_GB |
dc.subject | Fault detection | en_GB |
dc.subject | Fault isolation | en_GB |
dc.subject | Aerospace | en_GB |
dc.title | Second order sliding mode observers for the ADDSAFE actuator benchmark problem | en_GB |
dc.type | Article | en_GB |
dc.date.available | 2015-03-24T12:00:16Z | |
dc.identifier.issn | 0967-0661 | |
dc.description | Copyright © 2014 Elsevier. NOTICE: this is the author’s version of a work that was accepted for publication in Control Engineering Practice. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Control Engineering Practice Vol. 31 (2014), DOI: 10.1016/j.conengprac.2013.09.014 | en_GB |
dc.identifier.journal | Control Engineering Practice | en_GB |