Show simple item record

dc.contributor.authorBehzadian, Kourosh
dc.contributor.authorKapelan, Zoran
dc.contributor.authorSavic, Dragan
dc.contributor.authorArdeshir, Abdollah
dc.date.accessioned2013-05-31T10:23:02Z
dc.date.issued2009
dc.description.abstractThis paper presents a novel multi-objective genetic algorithm (MOGA) based on the NSGA-II algorithm, which uses metamodels to determine optimal sampling locations for installing pressure loggers in a water distribution system (WDS) when parameter uncertainty is considered. The new algorithm combines the multi-objective genetic algorithm with adaptive neural networks (MOGA-ANN) to locate pressure loggers. The purpose of pressure logger installation is to collect data for hydraulic model calibration. Sampling design is formulated as a two-objective optimization problem in this study. The objectives are to maximize the calibrated model accuracy and to minimize the number of sampling devices as a surrogate of sampling design cost. Calibrated model accuracy is defined as the average of normalized traces of model prediction covariance matrices, each of which is constructed from a randomly generated sampling set of calibration parameter values. This method of calculating model accuracy is called the 'full' fitness model. Within the genetic algorithm search process, the full fitness model is progressively replaced with the periodically (re)trained adaptive neural network metamodel where (re)training is done using the data collected by calling the full model. The methodology was first tested on a hypothetical (benchmark) problem to configure the setting requirement. Then the model was applied to a real case study. The results show that significant computational savings can be achieved by using the MOGA-ANN when compared to the approach where MOGA is linked to the full fitness model. When applied to the real case study, optimal solutions identified by MOGA-ANN are obtained 25 times faster than those identified by the full model without significant decrease in the accuracy of the final solution.en_GB
dc.identifier.citationVol. 24 (4), pp. 530 - 541en_GB
dc.identifier.doi10.1016/j.envsoft.2008.09.013
dc.identifier.urihttp://hdl.handle.net/10871/9764
dc.language.isoenen_GB
dc.publisherElsevieren_GB
dc.relation.urlhttp://dx.doi.org/10.1016/j.envsoft.2008.09.013en_GB
dc.subjectuncertaintyen_GB
dc.subjectparameteren_GB
dc.subjectdistribution systemsen_GB
dc.subjectwater distribution systemsen_GB
dc.subjectmulti-objective genetic algorithmen_GB
dc.subjectdistribution model calibrationen_GB
dc.subjectstationsen_GB
dc.subjectlocationsen_GB
dc.subjectsensor placementen_GB
dc.subjectadaptive neural networksen_GB
dc.subjectmetamodelsen_GB
dc.subjectcalibrationen_GB
dc.subjectwater distributionen_GB
dc.titleStochastic sampling design using a multi-objective genetic algorithm and adaptive neural networksen_GB
dc.date.available2013-05-31T10:23:02Z
dc.identifier.issn1364-8152
dc.descriptionCopyright © 2009 Elsevier. NOTICE: this is the author’s version of a work that was accepted for publication in Environmental Modelling and Software. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Environmental Modelling and Software, Volume 24 Issue 4 (2009), DOI: 10.1016/j.envsoft.2008.09.013en_GB
dc.identifier.journalEnvironmental Modelling and Softwareen_GB


Files in this item

This item appears in the following Collection(s)

Show simple item record